Huawei Quidway S2000 Series User Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches Chapter 2 AAA Configuration Commands
2-7
Description
Using display local-user command, you can view the relevant information of all the
local users or the specified one(s).
This command displays the relevant information about a specified or all the local users.
The output can help you with the fault diagnosis and troubleshooting related to local
user.
For the related command, see local-user.
Example
# Display the relevant information of all the local users.
<Quidway> display local-user
The contents of local user user1:
State: Active ServiceType Mask: None
Idle Cut: Disable
AccessLimit: Disable Current AccessNum: 0
Bind location: Disable
Vlan ID: Disable
IP address: Disable
MAC address: Disable
Total 1 local user(s) Matched,1 listed.
2.1.7 domain
Syntax
domain [ isp-name | default { disable | enable isp-name } ]
undo domain isp-name
View
System view
Parameter
isp-name: Specifies an ISP domain name. The name is expressed with a character
string not exceeding 24 characters, excluding “/”, “: ”, “*”, “? ”, “<”, and “>”.
default: configure default ISP.
disable: Disable default ISP configuration.
enable: Enable default ISP configuration.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English