Huawei Quidway S2000 Series

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 4 System Maintenance Commands
4-22
MODU_ID NAME ENABLE LOG LEVEL ENABLE TRAP LEVEL ENABLE DEBUGGING LEVEL
ffff0000 all Y warning Y debugging Y debugging
4.5.2 display info-center
Syntax
display info-center
View
Any view
Parameter
None
Description
Using display info-center command, you can view the configuration of system log and
the information recorded in the memory buffer.
If the information in the current log/trap buffer is less than the specified sizeval, display
the actual log/trap information.
For the related commands, see info-center enable,info-center loghost,info-center
logbuffer,info-center console channel,info-center monitor channel.
Example
# Show the system log information.
<Quidway> display info-center
Information Center:enabled
Log host:
173.168.1.10, channel number:2, channel name:loghost,
language:english , host facility local:7
Console:
channel number:0, channel name:console
Monitor:
channel number:1, channel name:monitor
SNMP Agent:
channel number:5, channel name:snmpagent
Log buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:6, channel number:4, channel name:logbuffer