Huawei Quidway S2000 Series User Manual

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches Chapter 1 Logging in Ethernet Switch Commands
1-21
View
User view
Parameter
none
Description
Using system-view command, you can enter system view from user view.
For the related commands, see quit, return.
Example
# Enter system view from user view.
<Quidway> system-view
Enter system view , return user view with Ctrl+Z.
[Quidway]
1.1.29 telnet
Syntax
telnet host-ip-address [ service-port ]
View
User view
Parameter
host-ip-address: Specifies the IP address or the hostname of the remote Ethernet
switch. If it is the hostname, the Ethernet switch must have the function of static
resolution.
service-port: Designates the TCP port on the remote Ethernet switch providing Telnet
service, ranging from 0 to 65535.
Description
Using telnet command, you can log in to another Ethernet switch from the current one
via telnet for remote management. To terminate the Telnet logon, press <Ctrl+]>.
By default, when the service-port is not specified, the default telnet port number is 23.
For the related command, see display tcp status.
Example
# Log in to Ethernet switch Quidway2 at 129.102.0.1 from the current Quidway1
switch.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English