Huawei Quidway S2000 Series User Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 1 File System Management Commands
1-20
View
Local user view
Parameter
telnet: Specifies user type as Telnet.
level level: Specifies the level of Telnet users. The argument level is an integer in the
range of 0 to 3 and defaults to 3.
ftp: Specifies user type as ftp.
ftp-directory directory: Specifies the directory of ftp users, directory is a character
string of up to 64 characters.
lan-access: Specifies user type to lan-access, which mainly refers to Ethernet
accessing users, 802.1x supplicants for example.
Description
Using service-type command, you can configure a service type for a particular user.
Using undo service-type command, you can cancel the specified service type for the
user.
Example
# Set to provide the lan-access service for the user huawei1.
[Quidway-user-huawei1] service-type lan-access
1.4 FTP Client Commands
1.4.1 ascii
Syntax
ascii
View
FTP Client view
Parameter
none

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English