Huawei Quidway S2000 Series User Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 2 MAC Address Table Management Commands
2-3
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)
00e0-fc01-0101 1 Learned Ethernet0/1 300
2.1.3 mac-address
Syntax
mac-address { static | dynamic } mac-addr interface { interface-name | interface-type
interface-num }
undo mac-address [ static | dynamic ] [ [ mac-addr ] interface {interface-name |
interface-type interface-num }]
View
System view
Parameter
static: Static table entry, lost after resetting switch.
dynamic: Dynamic table entry, which will be aged.
mac-addr: Specify the MAC address.
interface-type: interface type;
interface-num: interface number;
interface-name: interface name;
Description
Using mac-address command, you can add/modify the MAC address table entry.
Using undo mac-address command, you can cancel MAC address table entry
If the input address has been existed in the address table, the original entry will be
modified. That is, replace the interface pointed by this address with the new interface
and the entry attribute with the new attribute (dynamic entry and static entry).
All the (MAC unicast) addresses on a certain interface can be deleted. User can
choose to delete any of the following addresses: address learned by system
automatically, dynamic address configured by user, static address configured by user.
Because the address table is shared in the VLAN domain, you need specify the VLAN
of the multicast address and the port of the unicast address, when adding entries to the
address table.
For the related commands, see display mac-address.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English