Huawei Quidway S2000 Series User Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 5 SNMP Configuration Commands
5-17
5.1.18 snmp-agent trap life
Syntax
snmp-agent trap life seconds
undo snmp-agent trap life
View
System view
Parameter
seconds: Specify the timeouts, ranging from 1 to 2592000 seconds; By default, the
timeout interval is 120 seconds.
Description
Using snmp-agent trap life command, you can configure the timeout of Trap packets.
Using undo snmp-agent trap life command, you can restore the default value.
The set timeout of Trap packet is represented by seconds. If time exceeds seconds,
this Trap packet will be discarded.
For the related commands, see snmp-agent trap enable, snmp-agent target-host .
Example
# Configure the timeout interval of Trap packet as 60 seconds.
[Quidway] snmp-agent trap life 60
5.1.19 snmp-agent trap queue-size
Syntax
snmp-agent trap queue-size length
undo snmp-agent trap queue-size
View
System view

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English