Huawei Quidway S2000 Series User Manual

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches Chapter 1 HGMP V2 Configuration Commands
1-5
Example
# Enable system NDP.
[Quidway] ndp enable
1.1.3 ndp timer hello
Syntax
ndp timer hello seconds
undo ndp timer hello
View
System view
Parameter
seconds: Specifies NDP packet interval and ranges from 5 to 254 in units of second. By
default, NDP packets are transmitted every 60 seconds.
Description
Using ndp timer hello command, you can configure how often to transmit the NDP
packets. Using undo ndp timer hello command, you can restore the default NDP
packet interval.
A device shall refresh the NDP information of its adjacent nodes in time to maintain
timely information as the adjacent nodes change. You can use configuration command
to adjust the NDP refreshing frequency.
Example
# Configure to transmit NDP packets every 80 seconds.
[Quidway] ndp timer hello 80
1.1.4 ndp timer aging
Syntax
ndp timer aging aging-in-secs
undo ndp timer aging

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English