Huawei Quidway S2000 Series User Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 1 File System Management Commands
1-17
Description
Using ftp server command, you can start FTP Server and enable FTP user logon.
Using undo ftp server command, you can close FTP Server and disable FTP user
logon.
By default, FTP Server is shut down.
Perform this command to easily start or shut down FTP Server, preventing Ethernet
Switch from being attacked by some unknown user.
Example
# Shut down FTP Server.
[Quidway] undo ftp server
1.3.4 ftp timeout
Syntax
ftp timeout
minute
undo ftp timeout
View
System view
Parameter
minute
: Connection timeouts (measured in minutes), ranging from 1 to 35791; By
default, the connection timeout time is 30 minutes.
Description
Using ftp timeout command, you can configure connection timeout interval. Using
undo ftp timeout command, you can restore the default connection timeout interval.
After a user logs on to an FTP Server and has established connection, if the connection
is interrupted or cut abnormally by the user, FTP Server will still hold the connection.
The connection timeout can avoid this problem. If the FTP server has no command
interaction with a client for a specific period of time, it considers the connection to be
failed and disconnect to the client.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English