Huawei Quidway S2000 Series

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 5 SNMP Configuration Commands
5-13
View
System view
Parameter
byte-count: Specify the size of SNMP packet (measured in bytes), ranging from 484 to
17940. By default, the size is 1500 bytes.
Description
Using snmp-agent packet max-size command, you can configure the size of SNMP
packet that the Agent can send/receive. Using undo snmp-agent packet max-size
command, you can restore the default size of SNMP packet.
The sizes of the SNMP packets received/sent by the Agent are different in different
network environment.
Example
# Set the size of SNMP packet to 1042 bytes.
[Quidway] snmp-agent packet max-size 1042
5.1.15 snmp-agent sys-info
Syntax
snmp-agent sys-info { contact sysContact | location syslocation | version { { v1 |
v2c | v3 } * | all } }
undo snmp-agent sys-info { [ contact ] [ location ] | version { { v1 | v2c | v3 } * |
all } }
View
System view
Parameter
sysContact: Specify a character string describing the system maintaining contact (in
bytes), with a length ranging from 1 to 255; By default, the contact information is
"HuaWei Beijing China".
sysLocation: Specify a character string to describe the system location; By default, the
character string is "Beijing China".