Huawei Quidway S2000 Series

Command Manual - VLAN
Quidway S2000 Series Ethernet Switches Chapter 1 VLAN Configuration Commands
1-1
Chapter 1 VLAN Configuration Commands
1.1 VLAN Configuration Commands
1.1.1 description
Syntax
description string
undo description
View
VLAN view
Parameter
string: description character string of current VLAN, with a length ranging from 1 to 32
characters. The default description character string of current VLAN is VLAN ID of the
VLAN, e.g. VLAN 0001.
Description
Using description command, you can configure a description for the current VLAN.
Using undo description command, you can restore the default description of current
VLAN.
For the related command, see display vlan.
Example
# Specify a description character string “RESEARCH” for current VLAN.
[Quidway-vlan1] description RESEARCH
1.1.2 display vlan
Syntax
display vlan [ vlan_id | all | static | dynamic ]
View
Any view
Parameter
vlan_id: Display information of specified VLAN.
all: Display information of all VLANs.