Huawei Quidway S2000 Series User Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches Chapter 2 AAA Configuration Commands
2-12
Example
# Set the user huawei1 to display the password in simple text, given the password is
20030422.
[Quidway-luser-huawei1] password simple 20030422
2.1.12 radius-scheme
Syntax
radius-scheme radius-scheme-name
undo radius-scheme
View
ISP domain view
Parameter
radius-scheme-name: Specifies a RADIUS server group, with a character string not
exceeding 32 characters.
Description
Using radius-scheme command, you can configure the RADIUS server group used by
the current ISP domain. Using undo radius-scheme command, you can restore the
RADIUS server group used by the current ISP domain to the default RADIUS server
group.
After an ISP domain is created, it uses the default RADIUS server group (named
“default”. For configuration of relevant parameters, read the RADIUS Configuration
section of this chapter ) of the system.
This command is used to specify the RADIUS server group for the current ISP domain.
The specified RADIUS server group shall have been created.
For the related commands, see radius scheme, display radius.
Example
! The following example designates the current ISP domain, huawei163.net, to use the
RADIUS server, huawei.
[Quidway-isp-huawei163.net] radius-scheme Huawei
2.1.13 service-type
Syntax
service-type { telnet [ level level ] | ftp [ ftp-directory directory ] | lan-access }
undo service-type { telnet [ level ] | ftp [ ftp-directory ] | lan-access }

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English