Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 4 System Maintenance Commands
4-23
dropped messages:0, overwrote messages:0
Trap buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:0, channel number:3, channel name:trapbuffer
dropped messages:0, overwrote messages:0
Information timestamp setting:
log - date, trap - date, debug - boot
4.5.3 info-center channel name
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specify the channel name with a character string not exceeding 30
characters, excluding "-", "/" or "\". .
Description
Using info-center channel name command, you can rename a channel specified by
the channel-number as channel-name. Using undo info-center channel command,
you can restore the channel name.
Note that the channel name cannot be duplicated.
Example
# Rename the channel 0 as execconsole.
[Quidway] info-center channel 0 name execconsole