Huawei Quidway S2000 Series

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 5 SNMP Configuration Commands
5-8
5.1.9 display snmp-agent usm-user
Syntax
display snmp-agent usm-user [ engineid engineid ] [ group groupname ]
[ username username ]
View
Any view
Parameter
engineid: display user information with specified engine ID.
username:display user information with specified user name.
groupname:display user information of specified group.
Description
Using display snmp-agent usm-user command, you can view information of all the
SNMP usernames in the group username list.
Example
# Display the information of all the current users.
<Quidway> display snmp-agent usm-user
User name: authuser
Engine ID: 00000009020000000C025808
UserStatus: active
The following table describes the output fields.
Table 5-3 Output description of the display snmp-agent usm-user command
Field Description
User name Name of SNMP user
Engine ID Character string identifying SNMP device
UserStatus
The status of the user, may be active or inactive.