Huawei Quidway S2000 Series User Manual

Command Manual - Port
Quidway S2000 Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
1-5
Parameter
none
Description
Using display lock-port-mac-aging-time command, you can view the aging time of
MAC address table corresponding to the lock port.
Example
# Display the MAC aging time of the lock port.
<Quidway> display lock-port-mac-aging-time
The mac aging time of lock-port: 1 hour(s)
Table 1-2 Output description of the display lock-port-mac-aging-time command
Field Description
The mac aging time of lock-port: 1 hour(s) The lock-port-mac-aging-time is 1 hour
1.1.5 display loopback-detection
Syntax
display loopback-detection
View
Any view
Parameter
none
Description
Using display loopback-detection command, you can view whether the port
loopback detection has been enabled. If it has been enabled, then the time interval of
the detection and the current port loopback information will also be displayed.
Example
# Display if the port loopback detection is enabled.
<Quidway> display loopback-detection
Loopback-detection is running
Detection interval time is 30 seconds
There is no port existing loopback link

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English