Huawei Quidway S2000 Series User Manual

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches Chapter 1 HGMP V2 Configuration Commands
1-16
Example
# Add the candidate device, with MAC address 00E0-fc00-35e7 and super-password
huawei, to the cluster, and its member number is 6.
[Huawei_0.Quidway-cluster] add-member 6 mac-address 00E0-fc00-35e7 password
huawei
1.3.2 administrator-address
Syntax
administrator-address mac-address name name
undo administrator-address
View
Cluster view
Parameter
mac-address: This parameter is to define MAC address of the administrator device.
name: Name of an existing cluster with no more than 8 characters, including only letters,
digital, subtraction sign “-” and underline “_”.
Description
Using administrator-address command, you can store such information as
administrator device address and cluster name related to a cluster on a member device
and add a candidate to a cluster. Using undo administrator-address command, you
can cancel a member from the cluster and make it a candidate again.
This command is used for saving configuration information. Generally a user does not
need to use it. A member left the cluster through the undo administrator-address
command will not notify the administrator device, and therefore you can still see such
device on the administrator device yet it turns down. The right way to remove a cluster
member is to execute the delete-member command.
Example
# Delete the current member device from the cluster.
[Quidway-cluster] undo administrator-address

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English