Huawei Quidway S2000 Series User Manual

Command Manual - Network Protocol
Quidway S2000 Series Ethernet Switches Chapter 3 IP Performance Configuration Commands
3-4
Field Description
bad protocol Number of packets with wrong protocol number
bad format Number of packets in bad format
bad checksum Number of packets with wrong checksum
bad options Number of packets that has wrong options
Output: forwarding Number of forwarded packets
local Number of packets that are sent by the local device
dropped Number of dropped packets during transmission
no route Number of packets that cannot be routed
compress fails Number of packets that cannot be compressed
Fragment: input Number of input fragments
output Number of output fragments
dropped Number of dropped fragments
fragmented Number of packets that are fragmented
couldn't fragment Number of packets that cannot be fragmented
Reassembling: sum Number of packets that are reassembled
timeouts Number of packets that time out
3.1.4 display tcp status
Syntax
display tcp status
View
Any view
Parameter
none
Description
Using display tcp status command, you can view the TCP connection state.
Example
# Display the state of all TCP connections.
<Quidway> display tcp status
TCPCB Local Add:port Foreign Add:port State
03e37dc4 0.0.0.0:4001 0.0.0.0:0 Listening
04217174 100.0.0.204:23 100.0.0.253:65508 Established
Output
description of the display tcp status display

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English