Huawei Quidway S2000 Series User Manual

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches Chapter 1 Logging in Ethernet Switch Commands
1-13
Parameter
none
Description
Using return command, you can return to user view from a view other than user view.
Combination key <Ctrl+Z> performs the same function with the return command.
For the related command, see quit.
Example
# Return to user view from system view.
[Quidway] return
<Quidway>
1.1.18 screen-length
Syntax
screen-length screen-length
undo screen-length
View
User interface view
Parameter
screen-length: Specifies how many lines can be displayed on a screen, ranging from 0
to 512. The default value is 24.
Description
Using screen-length command, you can configure how many lines that can be
displayed on a screen of the terminal. Using undo screen-length command, you can
restore the default number of terminal information lines displayed on the terminal
screen.
The screen-length 0 command is used to disable this function.
Example
# Configure the lines that can be displayed on a screen as 20 lines.
[Quidway-ui-aux0] screen-length 20

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English