Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 6 RMON Configuration Commands
6-7
For the related commands, see rmon statistics.
Example
# Show RMON statistics.
<Quidway> display rmon statistics Ethernet 2/1
Statistics entry 1 owned by HUAWEI is VALID.
Interface : Ethernet2/1<ifEntry.642>
Received :
octets :0 , packets :0
broadcast packets :0 , multicast packets:0
undersized packets :0 , oversized packets:0
fragments packets :0 , jabbers packets :0
CRC alignment errors:0 , collisions :0
Dropped packet (insufficient resources):0
Packets received according to length (octets):
64 :0 , 65-127 :0 , 128-255 :0
256-511:0 , 512-1023:0 , 1024-1518:0
Table 6-6 Output description of the display rmon statistics command
Field Description
Interface Port
HUAWEI Owner
VALID The entry corresponding to the index is valid
octets Received/Sent octets in sampling time
packets Packets received/sent in sampling time
broadcast packets Number of broadcast packets
multicast packets Number of multicast packets
undersized packets Number of undersized packets
oversized packets Number of oversized packets
fragments packets Number of undersized and CRC error packets
jabbers Number of oversized and CRC error packets
CRC alignment errors Number of CRC error packets
collisions Number of collision packets
Dropped packet (insufficient resources) Dropping packet events
6.1.7 rmon alarm
Syntax
rmon alarm entry-number alarm-variable sampling-time { delta | absolute }
rising-threshold threshold-value1 event-entry1 falling-threshold threshold-value2
event-entry2 [ owner text ]
undo rmon alarm
entry-number
To Next Page
Loading...
Need help?
General