Huawei Quidway S2000 Series User Manual

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches Chapter 1 HGMP V2 Configuration Commands
1-32
[Huawei_0.Quidway-cluster] reboot member 2
1.3.18 snmp-host
Syntax
snmp-host ip-address
undo snmp-host
View
Cluster view
Parameter
ip-address: IP address of the SNMP host configured for the cluster.
Description
Using snmp-host command, you can configure the public SNMP host for the members
inside a cluster on the administrator device. Using undo snmp-host command, you
can cancel the public SNMP host.
By default, there is no public SNMP host.
This command is used to configure the IP address of the network management site for
the cluster, thereby a cluster member can send the trap information to it via the
administrator device.
Example
# Configure the IP address of SNMP host for the cluster on the administrator device.
[Huawei_0.Quidway-cluster] snmp-host 1.0.0.9
1.3.19 tftp-server
Syntax
tftp-server ip-address
undo tftp-server
View
Cluster view

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English