Huawei Quidway S2000 Series User Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 1 File System Management Commands
1-33
Parameter
none
Description
Using verbose command, you can enable verbose. Using undo verbose command,
you can disable verbose.
By default, verbose is enabled.
Example
# Enable verbose.
[ftp]verbose
1.5 TFTP Configuration Commands
1.5.1 tftp
Syntax
tftp { ascii | binary
}
View
System view
Parameter
ascii: Text format.
binary: Binary format; By default, the transmission mode is binary.
Description
Using tftp command, you can configure the transmission mode of the TFTP files.
TFTP transmits files in two modes, binary mode for program files and ASCII mode for
text files. You can perform this command to configure the file transmission mode. By
default, TFTP transmits files in binary mode. Before resetting the mode and restarting
the switch, the set mode will not change.
For the related commands, see tftp get, tftp put.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English