Huawei Quidway S2000 Series User Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches Chapter 2 AAA Configuration Commands
2-16
2.2.3 display radius
Syntax
display radius [ radius-server-name ]
View
Any view
Parameter
radius-server-name: Specifies the RADIUS server group name with a character string
not exceeding 32 characters, excluding “/”, “:”, “*”, “?”, “<” and “>”. Display all RADIUS
server groups when the parameter is not set.
Description
Using display radius command, you can view the configuration information of all
RADIUS server groups or a specified one.
By default, This command outputs the configuration information about the specified or
all the RADIUS server groups. The output can help with RADIUS diagnosis and
troubleshooting.
For the related command, see radius scheme.
Example
# Display the configuration information of all the RADIUS server groups.
<Quidway> display radius
------------------------------------------------------------------
SchemeName =system Index=0 Type=huawei
Primary Auth IP =127.0.0.1 Port=1645 State=active
Primary Acct IP =127.0.0.1 Port=1646 State=active
Second Auth IP =0.0.0.0 Port=1812 State=block
Second Acct IP =0.0.0.0 Port=1813 State=block
Auth Server Encryption Key= huawei
Acct Server Encryption Key= huawei
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts =5
Retry sending times of noresponse acct-stop-PKT =500
Username format =without-domain
Data flow unit =Byte
Packet unit =1
------------------------------------------------------------------
Printed [1]items

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English