Huawei Quidway S2000 Series

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 4 System Maintenance Commands
4-11
4.2.4 display saved-configuration
Syntax
display saved-configuration
View
Any view
Parameter
none
Description
Using display saved-configuration command, you can view the configuration files in
the flash memory of Ethernet Switch.
If the Ethernet Switch works abnormally after electrified, execute the display
saved-configuration command to view the startup configuration of the Ethernet
Switch.
For the related commands, see save, reset saved-configuration, display
current-configuration.
Example
# Display configuration files in flash memory of Ethernet Switch.
<Quidway> display saved-configuration
#
sysname Quidway
#
radius scheme system
server-type nec
primary authentication 127.0.0.1 1645
primary accounting 127.0.0.1 1646
user-name-format without-domain
domain system
radius-scheme system
access-limit disable
state active
idle-cut disable