Huawei Quidway S2000 Series User Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 4 System Maintenance Commands
4-10
local-server nas-ip 127.0.0.1 key nec
#
vlan 1
#
user-interface aux 0
user-interface vty 0 4
#
return
4.2.3 display debugging
Syntax
display debugging [ interface { interface-name | interface-type interface-num } ]
[ module-name ]
View
Any view
Parameter
interface-name: Specify the Ethernet port name.
interface-type: Specify the Ethernet port type.
interface-num: Specify the Ethernet port number.
module-name: Specify the module name.
Description
Using display debugging command, you can view the enabled debugging process.
Show all the enabled debugging when there is no parameter.
For the related commands, see debugging.
Example
# Show all the enabled debugging.
<Quidway> display debugging
IP packet debugging switch is on.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English