Huawei Quidway S2000 Series User Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches Chapter 3 HABP Configuration Commands
3-3
View
Any view
Parameter
None
Description
Using the display habp traffic command, you can view HABP packet statistics.
Example
# Display HABP packet statistics.
[Quidway] display habp traffic
HABP counters :
Packets output: 0, Input: 0
ID error: 0, Type error: 0, Version error: 0
Sent failed: 0
3.1.5 habp enable
Syntax
habp enable
undo habp enable
View
System view
Parameter
None
Description
Using the habp enable command, you can enable HABP attribute at a switch. Using
the undo hapb enable command, you can disable HABP attribute at a switch.
By default, HABP attribute is disabled at a switch.
If 802.1x attribute is enabled on switch and HABP attribute is not enabled, for those
ports where 802.1x authentication is skipped, packets will be filtered by 802.1x attribute,
so the management over them is also impossible. When 802.1x attribute are enabled,
HABP attribute should be enabled meanwhile.
Example
# Enable HABP attribute at a switch.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English