Huawei Quidway S2000 Series

Command Manual - VLAN
Quidway S2000 Series Ethernet Switches Chapter 2 Isolate-User-Vlan Configuration Commands
2-1
Chapter 2 Isolate-User-Vlan Configuration
Commands
2.1 isolate-user-vlan Configuration Commands
2.1.1 display isolate-user-vlan
Syntax
display isolate-user-vlan [ isolate-user-vlan_num ]
View
Any view
Parameter
isolate-user-vlan_num: VLAN ID of isolate-user-vlan, ranging from 1 to 4094.
Description
Using display isolate-user-vlan command, you can view the mapping relationship
and the ports identifying the mapping relationship between isolate-user-vlan and
Secondary VLAN.
For the related command, see isolate-user-vlan enable, isolate-user-vlan.
Example
# Display the mapping relationship between isolate-user-vlan and Secondary VLAN.
[Quidway] display isolate-user-vlan
Isolate-user-VLAN Vlan ID : 3
Secondary Vlan ID : 4-5
Vlan ID: 3
Vlan Type: static
Isolate-user-VLAN Type : Isolate-user-VLAN
Route Interface: not configured
Description: VLAN 0003
Tagged Ports: none
Untagged Ports:
Ethernet0/4 Ethernet0/8 Ethernet0/18
Vlan ID: 4