Huawei Quidway S2000 Series User Manual

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches Chapter 2 System IP Configuration Commands
2-4
Table 2-3 Output description of display ip interface vlan-interface command
Field Description
Vlan-interface1 current state The current state of management VLAN interface
Line protocol current state The current state of Line protocol
Internet Address IP address
Broadcast address Broadcast address
The Maximum Transmit Unit The Maximum Transmit Unit
2.1.5 display ip routing-table
Syntax
display ip routing-table
View
Any view
Parameter
none
Description
Using display ip routing-table command, you can view the routing table summary.
This command displays routing table information in summary form. Each line
represents one route. The contents include destination address/mask length, protocol,
preference, metric, next hop and output interface.
Only current used route, i.e., best route, is displayed using display ip routing-table
command.
Example
# View the summary of routing table.
<Quidway> display ip routing-table
Routing Table: public net
Destination/Mask Proto Pre Cost Nexthop Interface
1.1.1.0/24 DIRECT 0 0 1.1.1.1 Vlan-interface1
1.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
2.2.2.0/24 DIRECT 0 0 2.2.2.1 Vlan-interface2
2.2.2.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
3.3.3.0/24 DIRECT 0 0 3.3.3.1 Vlan-interface3
3.3.3.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
4.4.4.0/24 DIRECT 0 0 4.4.4.1 Vlan-interface4
4.4.4.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.0/8 DIRECT 0 0 127.0.0.1 InLoopBack0

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English