Huawei Quidway S2000 Series User Manual

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches Chapter 1 HGMP V2 Configuration Commands
1-23
Table 1-5 Description of cluster status and statistics information
Field Description
Cluster name Name of the cluster
Role Role of the cluster member
Handshake timer Value of handshake timer
Handshake hold-time Value of handshake hold-time
IP-Pool IP pool of the cluster
No logging host configured
No SNMP host configured
No FTP server configured
No TFTP server configured.
The corresponding configuration of the cluster
# Display information about cluster on the member device.
<Quidway> display cluster
Cluster name:"sss"
Role:Member
Member number:1
Handshake timer:10 sec
Handshake hold-time:60 sec
Administrator device mac address:00e0-fc00-0003
Administrator status:Up
Table 1-6 Description of cluster status and statistics information
Field Description
Cluster name Name of the cluster
Role Role of the cluster member
Member state Member status
Member number Number of member device
Handshake timer Value of handshake timer
Handshake hold-time Value of handshake hold-time
Administrator device mac address MAC address of administrator device
Administrator status Status of administrator device
1.3.10 display cluster candidates
Syntax
display cluster candidates [ mac-address H-H-H | verbose ]
View
Any view

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English