Huawei Quidway S2000 Series User Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 3 Device Management Commands
3-4
number of ports, hardware version number, FPGA version number, BOOTROM
software version number, application version number, address learning mode, interface
card type and interface card type description, etc.
Example
# Show the card information.
<Quidway> display device
SlotNo SubSNo PortNum PCBVer FPGAVer CPLDVer BootRomVer AddrLM Type
0 0 24 REV.0 001 002 360 IVL MAIN
The following table describes the displaying information.
Table 3-2 Output description of the display device command
Field Description
SlotNo Physical card number
SubSNo Sub physical card number (namely stack card number)
PortNum Number of ports
PCBVer PCB version number
FPGAVer FPGA version number
CPLDVer r Hardware version number
BootRomVer BootROM software version number
AddrLM Address learning mode
Type Interface card type
3.1.6 display memory
Syntax
display memory
View
Any view
Parameter
slot-number: Specify slot number
Description
Using display memory command, you can display memory situation.
Example
# Display memory situation.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English