Huawei Quidway S2000 Series

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 1 File System Management Commands
1-16
1.3.2 display ftp-user
Syntax
display ftp-user
View
Any view
Parameter
none
Description
Using display ftp-user command, you can view the parameters of current FTP user.
You can perform this command to examine the configuration after setting FTP
parameters.
Example
# Show the configuration of FTP user parameters.
<Quidway> display ftp-user
% No ftp user
1.3.3 ftp server
Syntax
ftp sever enable
undo ftp sever
View
System view
Parameter
enable: Start FTP Server.