Huawei Quidway S2000 Series User Manual

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches Chapter 2 System IP Configuration Commands
2-13
mask-length: Mask length. Since "1" s in the 32-bit mask are required to be
consecutive, the mask in dotted decimal format can be replaced by mask-length,
which is the number of the consecutive "1" s in the mask.
null null-interface-number: Specify the NULL interface of the route. The packets sent
to NULL interface, a kind of virtual interface, will be discarded at once. Thus this can
decrease the system load.
gateway-address: Specifies the next hop IP address (in dotted decimal notation) of the
route.
value
: Specifies the preference of the route, ranging from 1 to 255.
reject: Specifies an unreachable route.
blackhole: Specifies a blackhole route.
Description
Using ip route-static command, you can configure a static route. Using undo ip
route-static command, you can cancel the configured static route.
By default, the system can obtain the sub-net route directly connected with the router.
When configuring a static route, the default preference is 60 if it is not specified.
Precautions: when the destination IP address and the mask are both 0.0.0.0, it is the
configured default route. If it fails to detect the routing table, a packet will be forwarded
along the default route.
For the related command, see display ip routing-table.
Example
# Configure the next hop of the default route as 129.102.0.2.
[Quidway] ip route-static 0.0.0.0 0.0.0.0 129.102.0.2
2.1.13 shutdown
Syntax
shutdown
undo shutdown
View
VLAN interface view
Parameter
none

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English