To Next Page

To Previous Page

Command Manual - Getting Started

Quidway S2000 Series Ethernet Switches Chapter 1 Logging in Ethernet Switch Commands

1-10

View

User interface view

Parameter

minutes: Specifies the minute, ranging from 0 to 35791.

seconds: Specifies the second, ranging from 0 to 59.

Description

Using idle-timeout command, you can configure the timeout function. If there is no

user operation performed before idle-timeout expires, the user interface will be

disconnected. Using undo idle-timeout command, you can restore the default

idle-timeout.

idle-timeout 0 means disabling idle-timeout.

By default, idle-timeout is set to 10 minutes.

Example

# Configure the timeout value to 1 minute on the AUX user interface.

[Quidway-ui-aux0] idle-timeout 1 0

1.1.13 language-mode

Syntax

language-mode { chinese | english }

View

User view

Parameter

chinese: Configures the language environment of command line interface as Chinese.

english: Configures the language environment of command line interface as English.

Description

Using language-mode command, you can switch between different language

environments of command line interface for convenience of different users.

By default, the value is English.

Example

# Switch from English mode to Chinese mode.

<Quidway> language-mode chinese

Huawei Quidway S2000 Series User Manual

Questions and Answers: