Huawei Quidway S2000 Series User Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 5 SNMP Configuration Commands
5-14
version: version of running SNMP. By default, the version is SNMP V3.
v1:SNMP V1.
v2c:SNMP V2C.
v3:SNMP V3.
all:all SNMP version (includes SNMP V1, SNMP V2C, SNMP V3).
Description
Using snmp-agent sys-info command, you can configure system information such as
geographical location of the device, contact information for system maintenance and
version information of running SNMP. Using undo snmp-agent sys-info location
command, you can restore the default value.
By default, the contact information is "HuaWei Beijing China", the system location is
"Beijing China", the SNMP version is SNMP V3.
Example
# Set system location as Building 3/Room 214.
[Quidway] snmp-agent sys-info location Building 3/Room 214
5.1.16 snmp-agent target-host
Syntax
snmp-agent target-host trap address udp-domain host-addr [ udp-port
udp-port-number ] params securityname community-string [ v1 | v2c | v3
[ authentication | privacy ] ]
undo snmp-agent target-host host-addr securityname community-string
View
System view
Parameter
trap:Specify the host to receive traps or notifications
address:Specify the transport addresses to be used in the generation of SNMP messages.
udp-domain:Specify transport domain over UDP for the target address
host-addr: IP address of destination host.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English