Huawei Quidway S2000 Series User Manual

Command Manual - Network Protocol
Quidway S2000 Series Ethernet Switches Chapter 1 ARP Configuration Commands
1-5
Table 1-2 Output description of the display arp display
Field Description
IP Address IP address of the ARP mapping entry
MAC Address MAC address of the ARP mapping entry
VLAN ID VLAN to which the static ARP entry belongs
Port Name Port to which the static ARP entry belongs
Aging Aging time of dynamic ARP entry in minutes
Type Type of ARP entry
1.1.5 display arp timer aging
Syntax
display arp timer aging
View
Any view
Parameter
vlan-id: VLAN interface.
Description
Using display arp timer aging command, you can view the current setting of the
dynamic ARP map aging timer.
For the related command, see arp timer aging.
Example
# Display the current setting of the ARP map aging timer.
[Quidway] display arp timer aging
Current ARP aging time is 10 minute(s)
1.1.6 reset arp
Syntax
reset arp [ dynamic | static | interface { interface_type interface_num |
interface_name } ]

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English