Huawei Quidway S2000 Series - Page 241

Command Manual - Network Protocol
Quidway S2000 Series Ethernet Switches Chapter 1 ARP Configuration Commands
1-6
View
User view
Parameter
dynamic: Clear the dynamic ARP mapping entries.
static: Clear the static ARP mapping entries
interface interface_name: Clear the ARP mapping entries that are related to the
specified. port, represented with interface_name= interface_type interface_num.
interface_type is port type and interface_num is port number. For details about
interface_type, interface_num and interface_name, refer to the Port Command
Manual.
Description
Using reset arp command, you can reset the ARP mapping entries.
For the related command, see arp static, display arp.
Example
# Reset the static ARP entries.
<Quidway> reset arp static