EasyManuals Logo

Huawei Quidway S2000 Series User Manual

Huawei Quidway S2000 Series
412 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #181 background imageLoading...
Page #181 background image
Command Manual - Security
Quidway S2000 Series Ethernet Switches Chapter 1 802.1x Configuration Commands
1-1
Chapter 1 802.1x Configuration Commands
1.1 802.1x Configuration Commands
1.1.1 display dot1x
Syntax
display dot1x [ sessions |statistics] [ interface interface-list ]
View
Any view
Parameter
sessions: Configures to display the session connection information of 802.1x.
statistics: Configures to display the relevant statistics information of 802.1x.
interface: Configures to display the 802.1x information on the specified interface.
interface-list: Ethernet interface list including several Ethernet interfaces, expressed in
the format interface-list = { interface-num [ to interface-num ] } & < 1-10 >.
interface-num
specifies a single Ethernet interface in the format
interface-num
=
{
interface-type
interface-num
|
interface-name
}, where
interface-type
specifies the
interface type,
interface-num
specifies the interface number and
interface-name
specifies the interface name. For the respective meanings and value ranges, read the
Parameter of the Port Command Manual section.
Description
Using display dot1x command, you can view the relevant information of 802.1x,
including configuration information, running state (session connection information) and
relevant statistics information.
By default, all the relevant 802.1x information about each interface will be displayed.
This command can be used to display the following information on the specified
interface: 802.1x configuration, state or statistics. If no port is specified when executing
this command, the system will display all 802.1x related information. For example,
802.1x configuration of all ports, 802.1x session connection information, and 802.1x
data statistical information. The output information of this command can help the user
to verify the current 802.1x configurations so as to troubleshoot 802.1x .
For the related commands, see reset dot1x statistics, dot1x, dot1x retry, dot1x
max-user, dot1x port-control, dot1x port-method, dot1x timer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S2000 Series and is the answer not in the manual?

Huawei Quidway S2000 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S2000 Series
CategorySwitch
LanguageEnglish

Related product manuals