Huawei Quidway S2000 Series

Command Manual - Security
Quidway S2000 Series Ethernet Switches Chapter 2 AAA Configuration Commands
2-3
2.1.3 cut connection
Syntax
cut connection { all | access-type { dot1x | gcm } | domain domain-name | interface
interface-type interface-number | ip ip-address | mac mac-address | radius-scheme
radius-scheme-name | vlan vlanid | ucibindex ucib-index | user-name user-name }
View
System view
Parameter
all: Configures to disconnect all connection.
access-type { dot1x | gcm }: Configures to cut a category of connections according to
logon type. dot1x means the 802.1x users. gcm means gcm user.
domain domain-name: Configures to cut the connection according to ISP domain.
domain-name specifies the ISP domain name with a character string not exceeding 24
characters. The specified ISP domain shall have been created.
mac mac-address: Configures to cut the connection of the supplicant whose MAC
address is mac-address. The argument mac-address is in the hexadecimal format
(x-x-x).
radius-scheme radius-server-name: Configures to cut the connection according to
RADIUS server name. radius-server-name specifies the RADIUS server name with a
character string not exceeding 32 characters, excluding “/”, “:”, “*”, “?”, “<” and “>”.
interface interface-type interface-number: Configures to cut the connection according
to the port.
ip ip-address: Configures to cut the connection according to IP address. The argument
ip-address is in the hexadecimal format (ip-address).
vlan vlanid: Configures to cut the connection according to VLAN ID. Here, vlanid
ranges from 1 to 4094.
ucibindex ucib-index: Configures to cut the connection according to ucib-index.
user-name user-name : Configures to cut the connection according to user name .
user-name is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding “/”, “:”, “*”, “?”, “<” and “>”. The @ character can
only be used once in one username. The pure username (the part before @, namely
the user ID) cannot exceed 24 characters.
Description
Using cut connection command, you can disconnect a user or a category of users by
force.
By default, no online user will be disconnected by force.