Huawei Quidway S2000 Series User Manual

Command Manual - Port
Quidway S2000 Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
1-2
Parameter
text: Port description character string, with 80 characters at most.
Description
Using description command, you can configure the description character string for
Ethernet port. Using undo description command, you can cancel the port description
character string.
By default, the port description character string is null.
Example
# Configure the description character string of Ethernet port Ethernet0/1 as
lanswitch-interface.
[Quidway-Ethernet0/1] description lanswitch-interface
1.1.3 display interface
Syntax
display interface [ interface_type | interface_type interface_num | interface_name ]
View
Any view
Parameter
interface_type: Specifies the port type.
interface_num: Specifies the port number.
interface_name: Specifies the port name in the interface_name= interface_type
interface_num format.
For parameter description, refer to the interface command.
Description
Using display interface command, you can view the configuration information on the
port.
If the port type and number are not specified when displaying the port information, the
information of all the ports will be displayed. If only the port type is specified, all the
information of the ports of this type will be displayed. If both port type and port number
are specified, the information of the designated port will be displayed.
Example
# Display configuration information of Ethernet0/1.
<Quidway> display interface ethernet0/1

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English