Huawei Quidway S2000 Series

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches Chapter 2 System IP Configuration Commands
2-11
View
System view
Parameter
vlan-id: Specifies the identification of management VLAN interface, ranging from 1 to
4094.
Description
Using interface vlan-interface command, you can create and enter management
VLAN interface view. Using undo interface vlan-interface command, you can cancel
management VLAN interface.
Before creating and entering the management VLAN interface view, the corresponding
VLAN specified by
vlan-id
must be created.
Example
# Enter the view of management VLAN interface 1.
[Quidway] interface vlan-interface 1
2.1.10 ip address
Syntax
ip address ip-address net-mask
undo ip address [ ip-address net-mask ]
View
VLAN interface view
Parameter
ip-address
: Configures the IP address of the management VLAN interface.
net-mask
: Configures the mask of the management VLAN interface.
Description
Using ip address command, you can configure the IP address and mask of the
management VLAN interface. Using undo ip address command, you can cancel the
IP address and mask of the management VLAN interface.
For the related command, see display interface vlan-interface.
Example
# Configure the IP address and mask for management VLAN interface 20.
[Quidway-Vlan-interface20] ip address 1.1.1.1 255.0.0.0