Huawei Quidway S2000 Series User Manual

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches Chapter 1 HGMP V2 Configuration Commands
1-11
Sometimes it only needs collecting the topology connected to the downlink ports, not
caring about that connected to the uplink. In this case, NTDP is supposed to be
disabled on the uplink ports.
Example
# Enable NTDP on Ethernet0/1.
[Quidway-Ethernet0/1] ntdp enable
1.2.4 ntdp explore
Syntax
ntdp explore
View
User view
Parameter
none
Description
Using ntdp explore command, you can start topology information collection when you
wants to collect network topology information. NTDP will collect the NDP information of
every device and all of their neighboring connections in the specified network scope.
The administrator device or network management system will learn the network
topology according to the information to manage and monitor the devices.
Example
# Start the topology collection.
<Quidway> ntdp explore
1.2.5 ntdp hop
Syntax
ntdp hop hop-value
undo ntdp hop

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English