Command Manual - QoS/ACL
Quidway S2000 Series Ethernet Switches Chapter 1 ACL Commands
1-4
Current time is 14:36:36 4-3-2003 Thursday
Time-range : hhy ( Inactive )
from 08:30 2-5-2005 to 18:00 2-19-2005
Time-range : hhy1 ( Inactive )
from 08:30 2-5-2003 to 18:00 2-19-2003
Table 1-2 the display Information
Field Description
Current time is 14:36:36 4-3-2003 Thursday
Indicates the current time of the switch (according to the switch
setting).
Time-range: hhy ( Inactive )
Indicates the name of the time-range. “( Inactive )” indicates the
status of this time-range is not active at current time.
from 08:30 2-5-2005 to 18:00 2-19-2005
The content of time-range: the first time is the beginning time , the
last time is the ending time.
# Display the time range named tm1.
<Quidway> display time-range tm1
Current time is 14:37:31 4-3-2003 Thursday
Time-range : tm1 ( Inactive )
from 08:30 2-5-2005 to 18:00 2-19-2005
Table 1-3 the display Information
Field Description
Current time is 14:36:36 4-3-2003 Thursday
Indicates the current time of the switch (according to the switch
setting).
Time-range : tm1 ( Inactive )
Indicates the name of the time-range. “( Inactive )” indicates the
status of this time-range is not active at current time.
from 08:30 2-5-2005 to 18:00 2-19-2005
The content of time-range: the first time is the beginning time , the
last time is the ending time.
1.1.4 reset acl counter
Syntax
reset acl counter { all | acl-number | acl-name }
To Next Page
Loading...
Need help?
General