Huawei Quidway S2000 Series User Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 1 File System Management Commands
1-1
Chapter 1 File System Management Commands
1.1 File System
1.1.1 cd
Syntax
cd
directory
View
User view
Parameter
directory: Destination directory; By default, the directory is the working path configured
by the user when the system starts.
Description
Using cd command, you can change the current user configuration path on the
Ethernet Switch.
Example
# Change the current working directory of the switch to flash.
<Quidway>cd flash:
<Quidway>pwd
flash:
1.1.2 copy
Syntax
copy fileurl-source fileurl-dest

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English