Huawei Quidway S2000 Series User Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches Chapter 2 AAA Configuration Commands
2-10
Parameter
user-name : Specifies a local username with a character string not exceeding 32
characters, excluding “/”, “:”, “*”, “?”, “<” and “>”. The @ character can only be used
once in one username. The pure username (the part before @, namely the user ID)
cannot exceed 24 characters. The user-name is case-insensitive, so that UserA is the
same as usera.
service-type: Specifies the service type. telnet means that: the specified user type is
telnet. ftp means that: the specified user type is ftp. lan-access means that the
specified user type is lan-access which mainly refers to Ethernet accessing users,
802.1x supplicants for example.
all: All the users.
Description
Using local-user command, you can configure a local user and enter the local user
view. Using undo local-user command, you can cancel a specified local user.
By default, no local user.
For the related commands, see display local-user , server-type.
Example
# Add a local user named huawei1.
[Quidway] local-user huawei1
[Quidway-luser-huawei1]
2.1.10 local-user password-display-mode
Syntax
local-user password-display-mode { cipher-force | auto }
undo local-user password-display-mode
View
System view
Parameter
cipher-force: Forced cipher mode specifies that the passwords of all the accessed
users must be displayed in cipher text.
auto: The auto mode specifies that a user is allowed to use the password command to
set a password display mode.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English