Huawei Quidway S2000 Series User Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches Chapter 3 HABP Configuration Commands
3-4
[Quidway] habp enable
3.1.6 habp server vlan
Syntax
habp server vlan vlan-id
undo habp server
View
System view
Parameter
vlan-id: VLAN ID, in range of 1~4094
Description
Using the habp server vlan command, you can set HABP mode as server and specify
transmitting HABP packets in a specific VLAN. Using the undo hapb server vlan
command, you can restore the HABP mode to the default value.
By default, the HABP mode is client.
You must first enable HABP attribute at a switch using the habp enable command, and
then specify HABP mode as server.
Example
# Specify HABP mode as server and transmit HABP packets in VLAN2.
[Quidway] habp server vlan 2
3.1.7 habp timer
Syntax
habp timer interval
undo habp timer
View
System view
Parameter
interval: Time interval to send HABP request packets, in range of 5~600 seconds. By
default, the time interval is 20 seconds.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English