Huawei Quidway S2000 Series User Manual

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches Chapter 1 HGMP V2 Configuration Commands
1-1
Chapter 1 HGMP V2 Configuration Commands
1.1 NDP Configuration Commands
1.1.1 display ndp
Syntax
display ndp [ interface
port-list
]
View
Any view
Parameter
interface port-list
: Specifies a list of ports isolated from the specified port. A list may
contain consecutive or separated ports, or the combination of consecutive and
separated ports. The parameter is expressed as { interface_type interface_num |
interface_name } [ to { interface_type interface_num | interface_name } ] } &<1-10>.
interface_type specifies the port type. interface_num specifies the port number,
expressed as slot number/port number. Key word to helps specify a port range.
Description
Using display ndp command, you can view global NDP configuration information,
including NDP packet interval, NDP information hold time and neighbor information of
all the ports.
Example
# Display global NDP configuration information.
[Quidway] display ndp
Neighbor Discovery Protocol is enabled.
Neighbor Discovery Protocol Ver: 1, Hello Timer: 60(s), Aging Timer: 180(s)
Interface: Ethernet0/1
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet0/2

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English