Huawei Quidway S2000 Series User Manual

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches Chapter 1 HGMP V2 Configuration Commands
1-33
Parameter
ip-address: IP address of TFTP server configured for the cluster.
Description
Using tftp-server command, you can configure the public TFTP server for the cluster
members on the administrator device. Using undo tftp-server command, you can
cancel the public TFTP server.
By default, there is no public TFTP Server.
Assign an IP address for TFTP server of the cluster, then the member devices can
access the server via the administrator device.
Example
# Configure IP address for TFTP server on the administrator device.
[Huawei_0.Quidway-cluster] tftp-server 1.0.0.9
1.3.20 timer
Syntax
timer interval-in-secs
undo timer
View
Cluster view
Parameter
Interval-in-secs: This parameter is to set sending time interval of the handshake packet,
ranging of 1 ~ 255 seconds. By default ,the value is 10 seconds.
Description
Using timer command, you can configure the interval of handshake packets. Using
undo timer command, you can restore the default value of the interval.
Inside a cluster, the member devices communicate with the administrator device
through transmitting handshake packets. The regular handshake can help the user
monitor the states of cluster members and links.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English