To Next Page

To Previous Page

Command Manual - System Management

Quidway S2000 Series Ethernet Switches Chapter 4 System Maintenance Commands

4-24

4.5.4 info-center console channel

Syntax

info-center console channel { channel-number | channel-name }

undo info-center console channel

View

System view

Parameter

channel-number: Channel number, ranging from 0 to 9, that is, system has ten

channels.

channel-name: Specify the channel name. The name can be channel6, channel7,

channel8, channel9, console, logbuffer, loghost, monitor, snmpagent,

trapbuffer.

Description

Using info-center console channel command, you can configure the channel through

which the log information is output to the console.

By default, Ethernet switches do not output log information to the console.

This command takes effect only after system logging is started.

For the related commands, see info-center enable,display info-center.

Example

# Configure to output log information to the console through channel 0.

[Quidway] info-center console channel 0

4.5.5 info-center enable

Syntax

info-center enable

undo info-center enable

Huawei Quidway S2000 Series User Manual

Questions and Answers: