Huawei Quidway S2000 Series

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches Chapter 1 Logging in Ethernet Switch Commands
1-4
Parameter
5: The data bits are 5.
6: The data bits are 6.
7: The data bits are 7.
8: The data bits are 8.
Description
Using databits command, you can configure the data bits for AUX (Console) port.
Using undo databits command, you can restore the default bits of the AUX (Console).
This command can only be performed in AUX user interface view.
By default, the value is 8.
Example
# Configure the data bits of AUX (Console) port to 7 bits.
[Quidway-ui-aux0] databits 7
1.1.5 display history-command
Syntax
display history-command
View
Any view
Parameter
none
Description
Using display history-command command, you can view the saved history
commands.
For the related command, see history-command max-size.
Example
# Display history commands.
<Quidway> display history-command
sys
quit
display his