Huawei Quidway S2000 Series User Manual

Command Manual - Integrated Management
Quidway S2000 Series Ethernet Switches Chapter 1 HGMP V2 Configuration Commands
1-19
View
System view
Parameter
None
Description
Using cluster command, you can enter cluster view.
Example
# Enter cluster view.
[Quidway] cluster
[Quidway-cluster]
1.3.6 cluster enable
Syntax
cluster enable
undo cluster enable
View
System view
Parameter
none
Description
Using cluster enable command, you can enable the cluster function on a switch. Using
undo cluster enable command, you can disable the cluster function of a switch.
By default, the cluster function is enabled on all the devices supporting cluster.
Above commands can be used on any device supporting the cluster function. When
you use the undo cluster enable command on an administrator device, the system will
delete the cluster and disable the cluster function on it. When you use it on a member
device, the system will exit the cluster and disable the cluster function on it.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English