Huawei Quidway S2000 Series User Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches Chapter 4 System Maintenance Commands
4-16
IP packet debugging switch is on.
4.3.2 display diagnostic-information
Syntax
display diagnostic-information
View
Any view
Parameter
none
Description
Using display
diagnostic-information command, you can view the current
configuration information about all running modules. You can use all these information
to help diagnose and troubleshoot the Ethernet switch.
When the Ethernet switch does not run well, you can collect all sorts of information
about the switch to locate the source of fault. However, each module has its
corresponding display command, which make it difficult for you to collect all the
information needed. In this case, you can use display
diagnostic-information
command.
Example
# Display all system configuration information
<Quidway> display
diagnostic-information
This operation may take a few minutes, continue?[Y/N]y
---------------display clock---------------
20:12:39 UTC Mon 2000/5/8
---------------display version---------------
Huawei Versatile Routing Platform Software
VRP (tm) software, Version 3.10
Copyright (c) 2000-2002 HUAWEI TECH CO., LTD.

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English