Huawei Quidway S2000 Series User Manual

Command Manual - Getting Started
Quidway S2000 Series Ethernet Switches Chapter 1 Logging in Ethernet Switch Commands
1-9
Example
# Configure the header of setting up a session.
[Quidway] header shell %
Enter TEXT message. End with the character '%'.
SHELL : Hello! Welcome %
The header of setting up a session displays on terminal when a user logs on again.
[Quidway] quit
<Quidway> quit
Press ENTER to get started
SHELL : Hello! Welcome
<Quidway>
1.1.11 history-command max-size
Syntax
history-command max-size value
undo history-command max-size
View
User interface view
Parameter
value
: Defines the size of the history buffer, ranging from 0 to 256. By default, the size
is 10, that is, 10 history commands can be saved.
Description
Using history-command max-size command, you can configure the size of the
history command buffer. Using undo history-command max-size command, you can
restore default size of the history command buffer.
Example
# Set the history buffer to 20, namely saving 20 history commands.
[Quidway-ui-aux0] history-command max-size 20
1.1.12 idle-timeout
Syntax
idle-timeout minutes [ seconds ]
undo idle-timeout

Huawei Quidway S2000 Series Specifications

General

Brand	Huawei
Model	Quidway S2000 Series
Category	Switch
Language	English